Config Posted August 26, 2013 Report Share Posted August 26, 2013 How to Recover Deleted Files in Windows For Free? Check this video To manually start Windows XP with a clean boot, follow these steps: Step 1: Start the System Configuration Utility Click Start, click Run, type msconfig, and then click OK. The System Configuration Utility dialog box is displayed. Step 2: Configure selective startup options In the System Configuration Utility dialog box, click the General tab, and then click Selective Startup. Click to clear the Process SYSTEM.INI File check box. Click to clear the Process WIN.INI File check box. Click to clear the Load Startup Items check box. Verify that Load System Services and Use Original BOOT.INI are checked. Click the Services tab. Click to select the Hide All Microsoft Services check box. Click Disable All, and then click OK. When you are prompted, click Restart to restart the computer. Step 3: Log on to Windows If you are prompted, log on to Windows. When you receive the following message, click to select the Don't show this message or launch the System Configuration Utility when Windows start check box, and then click OK.Notes You have used the System Configuration Utility to make changes to the way Windows starts. The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts. Choose the Normal Startup mode on the General tab to start Windows normally and undo the changes you made using the System Configuration Utility. Step 4: Optional step to disable features If the clean boot fixed the error, you do not have to perform this step.Important If your problem is not fixed and you do have to follow this step, it permanently removes all restore points from your computer. The System Restore feature uses restore points to restore your computer to an earlier state. If you remove the restore points, you can no longer restore Windows to an earlier state.This step temporarily disables Microsoft features such as Plug and Play, networking, event logging, and error reporting. Click Start, click Run, type msconfig, and then click OK. The System Configuration Utility dialog box is displayed. Click the General tab, click to clear the Load System Services check box, and then click OK. When you are prompted, click Restart to restart the computer. If these steps helped you start your computer in a clean-boot state, you are finished. If these steps did not help, go to the “Next Steps” section. If you have to return your computer to a normal startup state, go to “Steps to configure Windows to use a Normal startup state”. Steps to configure Windows to use a Normal startup state After you used the clean boot to resolve your problem, you can follow these steps to configure Windows XP to start normally. Click Start, and then click Run. Type msconfig, and then click OK. The System Configuration Utility dialog box is displayed. Click the General tab, click Normal Startup - load all device drivers and services, and then click OK. When you are prompted, click Restart to restart the computer. Davidelari, AntonyDumTD, pherhealf and 2 others 5 Link to comment Share on other sites More sharing options...
Recommended Posts