Jump to content

Adam

Moderators
  • Content Count

    48
  • Joined

  • Last visited

Posts posted by Adam

  1. Solition one: try WPA of Wise Care 365  If Can't

     

    Solution two:

    1. Quit all programs that are running.
    2. click "start", then click "run". In the "open" box, type' regedit,' and then click "OK".
    3. in Registry Editor, locate the following subkey:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\9.0\Common
    Note this registry key applies to "applies to" section lists all versions, does not vary depending on the version of. If you are running 32-bit Office systems on 64-bit versions of Windows, you will need to use Wow6432Node HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\9.0\Common\Internet.
    4. in the "Edit" menu, point to "new", and then click "".
    5. the new subkey named "Internet".
    6. ensure that the selected "Internet" subkey. In the "Edit" menu, point to "new", then click "DWORD value". Add the following registry value:
    Value name: ForceShellExecute

     

    7. double-click "ForceShellExecute", and then "value data" is set to 1. Click "OK".
    8. in the "registry" menu, click "exit".
  2. One, 

     Pls  find the same model of laptop batteries try, in both directions, there may be battery is broken, there may be power supply management chip is broken, battery is broken you can buy power management chip is broken that  is in trouble and in need of repair.
    Two,
    Pool cell aging appears damaged. May be caused by the forced disconnect the power, also which  may be your regular battery-powered, rechargeable batteries normal aging damage many times. (We recommend you replace battery battery group).

     

  3. The computer restart causes and solutions:<br />1, there might be BIOS settings problem, enter BIOS restore default settings or take the battery out of the motherboard, wait 5 minutes to get to. Objective: are the BIOS settings revert to the default value, excluding BIOS thermal preset automatic restart or shutdown.<br />2, if a reboot occurs before downloading a software application or software reset occurs when running the program, the software program might be causing the reboot, software uninstall and then reinstall the program in General, if the fault persists, then the software program itself has errors and cannot be used.<br />3, killing the virus with anti-virus software in safe mode, restart troubleshooting, it is caused by virus restart failure.<br />4, when you boot press F8 to enter safe mode in the exit to enter the normal mode. Available system that comes with the system restore feature to restore restart troubleshooting, restart is caused by damaged system files.<br />5, if the fault persists, then check the power supply power supply of poor quality, aging or power is too small and cannot meet the power supply needs of computer accessories, power quality power supply can be replaced, and if the troubleshooting, it is power reset fault caused.<br />6, when you hot-swap a device if the computer restart occurs, press the 3rd solution.<br />7, followed by a process of elimination, check the memory, video card, CPU, CPU fan, motherboard, and so on.<br />8, check the memory, quality does not cross the border, poor cooling, overclocking memory, different brands of memory mixed insertion and CAS values are set too low can cause the computer to restart, replace method to test memory available, and to adjust the memory parameters in the BIOS.<br />9, inspection boards, aging Board and capacitor fail or explode, motherboard and chassis back panel Reset short circuit can be raised, you can remove the motherboard from the chassis inspection or testing, then check the CPU Fan Heatsink silicone on the bottom is dry, dry, clean silicone on the CPU fan and the Nice coating of silicone. Then check the CPU fan turns, and the CPU temperature is normal.<br />10, cleaning method: through the dust cleaning of mainframe computer parts troubleshooting methods. Dust is also one of the factors that can cause your computer to automatically restart failed, this dust can cause oxidation aging parts, pins, has poor and short-circuit faults. These faults are caused by dust, typically using a cleaner more efficient.<br />11, change the system default automatic restart: right click on my computer/properties/Advanced/startup and recovery settings in the/system failure "automatically restart" before the hook to remove, and then press OK and restart the computer.<br />12, power instability, can also cause reboot failures occur, you might consider configuring a UPS backup power supply with a steady voltage function.<br /><br />In Device Manager, view the various drives where there are no clashes, there is no yellow! If the device driver is not compatible with the system might be causing; drivers for devices such as sound cards, video cards, network cards, deleted, and then install drivers one by one, each device installation, restart the computer to check which device driver is causing the fault, check out, download failure the updated driver for the device, and then you can install it. Then clean the dust in the computer, cleaning devices such as memory, video card, cheat, Reseat the memory and other devices.<br /><br />

  4.  Make sure  all operations are right  when you operate in the safe status of Windows or incorrect the installment of Windowstaller.

    Because the fix file of NOD32 is applied to the format MSI .So you must open the related service so that you can go on further installment.

    Operations as  below:

    One,Right-click of My PC

    Two,Click "manger and applied 'service

    Three,find 'Windows Installer' then double click

    Four,open the dialog box of "personlize"

    Five,in the column of Starting Trpe choose the Tab "Automatic"

    Six,Click the Tab"avtivate" under the column of Service Status"

    The last step ,click the tab"Applied "of Windows Installer

     

    If still failed  that needs Re-installment of the sofaware of Windows Installer. After that that might be Ok .

  5. The first  you  can unload your present PC system  . Because when you use PC system over one year it often  make PC operate slowly.

    The second  If you don't want to change your system you can use Wise Care 365 to do thoroughly cleaning .

    The third you can update your Physical Memory up to 2048MB.

    I think the the first two ways can be as your priority.

    Hopefully your PC will work faster though these solutions.

  6. Firstly    When you finished system installment  you must be surely about all the hardwares was attahced with the proper drive

    How to make sure all drives were installed ?

    1.Back to PC desktop

    2.Right click of the icon'My Pc'

    3.Click icon'Properties'

    4.Click icon 'hardware'

    5.click icon'deice mangement'

    If you find yellow mark under the position of the hardware it shows that your pc is in urgent need of  the related drive  .That will limit and block  some functions of your PC.

    Secondly   some important system files missing

    Regarding this situation if you can't find missing files  or cause much trouble it is better for you to Re-install system

    Of course the key solution is based on actual situation analysis  this is only as your reference.

×
×
  • Create New...