Jump to content

How to Fix USB Drive Issues After Installing Windows 8.1


Recommended Posts

Apart from the visible modifications adapted, Windows 8.1 raised its existing features to an extent. One of these latest enhancements is the optimized Power management feature.  The settings of this feature are molded in such a way that the external devices attached to the PC become irresponsive, if not active for a specified time and it does have a certain reason behind this activity.

 

Each of the modern time’s computing devices is specially designed to optimize its energy consumption. Microsoft has ensured to comply with this contemporary requisite in its latest version of operating system, Windows 8.1.

 

External devices that connect to a PC via USB controllers tend to intake a degree of electric charge. This keeps the device alive and active to correspond with the system. However, in Windows 8.1, when the device is not used or communicated within a specified timeframe, it enters a low power state. As a result, the device/drive does not show up in the connected devices, unexpectedly suspending the thread of a window browsing the USB device.

 

Many users have reported this issue as a system error and are in search of a perpetual solution. Let us show you how to get rid of this irritatingSuspend on Idle feature. Although the actual fix is to be carried within Windows Registry, you would have to identify the hardware ID of your subject device, connected through USB.

 

Locate Hardware ID

Plug in your device by inserting it into the USB slot

Right click on Windows 8.1 Start button to bring up the Power User menu

Locate and click Device Manager in the recorded settings

In the listed categories of hardware, click to expand Disk drives

(Note: Considering the instance of a USB storage device, we are tracing it under disk drives)

 

Select your USB storage device

While it is selected, go to View menu and list Devices by connection

You will directed to a detailed list where you can see the device underUSB Mass 

 

Storage Device node

Right-click USB Mass Storage Device node and access it’s Properties

In the Properties window, go to Details tab and choose Hardware Idsin Property field

In the Value box, note down 4 digit values stated after VID and PID, respectively

 

Resolve in Registry

Press Windows key + Run on your keyboard to open Run box

Type regedit in the Run box and hit Enter

Click Yes to confirm the UAC message and open up Registry Editor

In the left pane of Registry Editor, expand HKEY_LOCAL_MACHINE to navigate 

 

following key

SYSTEM\CurrentControlSet\Control\usbstor

Right click usbstor and choose New to create a Key under it

Name this newly created key as the 8 digit value of VID and PID, noted earlier

Right click this new key to create a New DWORD Value

Name the value as DeviceHackFlags and double click it to Modify

Choose Hexadecimal as the Base and put 400 in the field next toValue data

Click OK to save your changes and Exit Registry Editor

 

Once you are done with the above procedures, disconnect your USB controller device and reconnect it after a while. From now on, you will not experience a suspended external device connected through USB, even if it is left idle for hours.

 

Link to comment
Share on other sites

×
×
  • Create New...