Adam

Pls use WPU of Wise Care 365 to have a try .

Pls review it on this link http://forum.wisecleaner.com/index.php?/topic/1117-tips-how-to-fix-the-404-not-found-error/

Use Wise Pc 1st Aid to have a try .

Under what circumstance it appears this situation .In generally you need to find a reg file suffix that is under your running programe, double-click the import to, if not have , that needs to download a registry import tool.

Would you mind giving a specific description so that we can go on a further solution.

Solition one: try WPA of Wise Care 365 If Can't Solution two: 1. Quit all programs that are running. 2. click "start", then click "run". In the "open" box, type' regedit,' and then click "OK". 3. in Registry Editor, locate the following subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\9.0\Common Note this registry key applies to "applies to" section lists all versions, does not vary depending on the version of. If you are running 32-bit Office systems on 64-bit versions of Windows, you will need to use Wow6432Node HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\9.0\Common\Internet. 4. in the "Edit" menu, point to "new", and then click "". 5. the new subkey named "Internet". 6. ensure that the selected "Internet" subkey. In the "Edit" menu, point to "new", then click "DWORD value". Add the following registry value: Value name: ForceShellExecute 7. double-click "ForceShellExecute", and then "value data" is set to 1. Click "OK". 8. in the "registry" menu, click "exit".

Possibly your machine is overclocked, clear CMOS, take the battery down from the motherboard that is the round battery, wait for a few minutes then put the battery back on the mothboard.

One, Pls find the same model of laptop batteries try, in both directions, there may be battery is broken, there may be power supply management chip is broken, battery is broken you can buy power management chip is broken that is in trouble and in need of repair. Two, Pool cell aging appears damaged. May be caused by the forced disconnect the power, also which may be your regular battery-powered, rechargeable batteries normal aging damage many times. (We recommend you replace battery battery group).

Would you mind giving us a specific description so that we can go on a further analysis on this issue.

This is normal, because the Windows system is automatically updated

The computer restart causes and solutions:<br />1, there might be BIOS settings problem, enter BIOS restore default settings or take the battery out of the motherboard, wait 5 minutes to get to. Objective: are the BIOS settings revert to the default value, excluding BIOS thermal preset automatic restart or shutdown.<br />2, if a reboot occurs before downloading a software application or software reset occurs when running the program, the software program might be causing the reboot, software uninstall and then reinstall the program in General, if the fault persists, then the software program itself has errors and cannot be used.<br />3, killing the virus with anti-virus software in safe mode, restart troubleshooting, it is caused by virus restart failure.<br />4, when you boot press F8 to enter safe mode in the exit to enter the normal mode. Available system that comes with the system restore feature to restore restart troubleshooting, restart is caused by damaged system files.<br />5, if the fault persists, then check the power supply power supply of poor quality, aging or power is too small and cannot meet the power supply needs of computer accessories, power quality power supply can be replaced, and if the troubleshooting, it is power reset fault caused.<br />6, when you hot-swap a device if the computer restart occurs, press the 3rd solution.<br />7, followed by a process of elimination, check the memory, video card, CPU, CPU fan, motherboard, and so on.<br />8, check the memory, quality does not cross the border, poor cooling, overclocking memory, different brands of memory mixed insertion and CAS values are set too low can cause the computer to restart, replace method to test memory available, and to adjust the memory parameters in the BIOS.<br />9, inspection boards, aging Board and capacitor fail or explode, motherboard and chassis back panel Reset short circuit can be raised, you can remove the motherboard from the chassis inspection or testing, then check the CPU Fan Heatsink silicone on the bottom is dry, dry, clean silicone on the CPU fan and the Nice coating of silicone. Then check the CPU fan turns, and the CPU temperature is normal.<br />10, cleaning method: through the dust cleaning of mainframe computer parts troubleshooting methods. Dust is also one of the factors that can cause your computer to automatically restart failed, this dust can cause oxidation aging parts, pins, has poor and short-circuit faults. These faults are caused by dust, typically using a cleaner more efficient.<br />11, change the system default automatic restart: right click on my computer/properties/Advanced/startup and recovery settings in the/system failure "automatically restart" before the hook to remove, and then press OK and restart the computer.<br />12, power instability, can also cause reboot failures occur, you might consider configuring a UPS backup power supply with a steady voltage function.<br /><br />In Device Manager, view the various drives where there are no clashes, there is no yellow! If the device driver is not compatible with the system might be causing; drivers for devices such as sound cards, video cards, network cards, deleted, and then install drivers one by one, each device installation, restart the computer to check which device driver is causing the fault, check out, download failure the updated driver for the device, and then you can install it. Then clean the dust in the computer, cleaning devices such as memory, video card, cheat, Reseat the memory and other devices.<br /><br />

One . You can choose to Re-install XP system to accelerate the operate speed including repair the related troubles . Two . you can choose to update your Physical Memory up to 1048MB.

Make sure all operations are right when you operate in the safe status of Windows or incorrect the installment of Windowstaller. Because the fix file of NOD32 is applied to the format MSI .So you must open the related service so that you can go on further installment. Operations as below: One,Right-click of My PC Two,Click "manger and applied 'service Three,find 'Windows Installer' then double click Four,open the dialog box of "personlize" Five,in the column of Starting Trpe choose the Tab "Automatic" Six,Click the Tab"avtivate" under the column of Service Status" The last step ,click the tab"Applied "of Windows Installer If still failed that needs Re-installment of the sofaware of Windows Installer. After that that might be Ok .

The reason is that some kind of empty exe. are occupied by some powerboot procedures .Ban on startup is needed So you can ues the this function of Wise Care 365 to repair this issue.

Right- click of your desktop Lift-Click'personalize' Then you can review it as you want

The first you can unload your present PC system . Because when you use PC system over one year it often make PC operate slowly. The second If you don't want to change your system you can use Wise Care 365 to do thoroughly cleaning . The third you can update your Physical Memory up to 2048MB. I think the the first two ways can be as your priority. Hopefully your PC will work faster though these solutions.

Firstly When you finished system installment you must be surely about all the hardwares was attahced with the proper drive How to make sure all drives were installed ? 1.Back to PC desktop 2.Right click of the icon'My Pc' 3.Click icon'Properties' 4.Click icon 'hardware' 5.click icon'deice mangement' If you find yellow mark under the position of the hardware it shows that your pc is in urgent need of the related drive .That will limit and block some functions of your PC. Secondly some important system files missing Regarding this situation if you can't find missing files or cause much trouble it is better for you to Re-install system Of course the key solution is based on actual situation analysis this is only as your reference.

There is something wrong with service of your programming system . So before you start or operate a programe you had better try to forbid some kind of unnecessary service by using AID or Wise Care 365.

You can download related antivirus software that can identify whether PC is infected through the internet. .Wise Care 365 is just a applied sofaware and we havn't entered into security line at the moment .

You had better try a deeply cleaning for your PC such as hard disk frag ,registry ,quite big large of useless files ,etc.. Especially on you phsical memory. I would like you to use Wise Care 365 to do a professional cleaning .After that your PC will work faster.

You can try to find the exact positions where the corrupt files stay then you can delete attached character 'log' at the back of the corrupt files .Of course ,in so doing ,it will solve this problem .Additionally it will not do any bad for your PC System.

You can try to use the link as below to download Wise Care 365 to uninstall the files as you want http://www.wisecleaner.com/soft/WPU.zip

Si votre disque dur à formater ou réinstaller le système lorsque vous utilisez le périphérique Bluetooth pour remplacer le pilote du lien